What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 16.06.2025 12:23

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
An AC voltage/ current source, and an ac inductive load.
In schematic diagrams this is the symbol for a fuse:
Have you ever secretly watched someone while they were doing something private?
There are three different concepts here that are getting confused.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
a photo is worth a thousand words.
What kind of person does a narcissist hate?
So, the voltage could go up to 500 volts, and the fuse will not open up.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Upvotes:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–16 [ OO OLAOYE OYEBODE ]
How could Trump, with his deplorable garbage supporters, manage to win an election?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The other is “what does a “fuse” do?”
The bolt then partially travels down the line to your home.
China extracts critical mineral rubidium from brine for first time - South China Morning Post
For this case there are devices called Metal oxide varistors (MOV).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but I think this circuit , shows a few more pieces.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One is “what exactly is in a ‘surge protector’ ? ”
I post the exact comment here.
What have you learned from your parents' mistakes?
At one ohm, the resistor has a maximum of 1 watt power.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
He then describes Rainy Season and Lightning.
Is it true that Jehovah's witnesses once thought the world would end in 1975?
Barnstars:
This one hit behind the barn.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
How to see Mars visit a bright star and the moon this June - Space
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But it can get overloaded, and no longer works.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Why should you never do drugs? Will this story absolutely shock you?
It seems Mohan does not understand the difference between a comment and an Answer.
but this device (an Inductor) … impedes the rapid changes in the current.
the problem then depends on "how fast does the fuse operate?".
eight
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
so, what happens?
One
Now when you have a certain ac resistance, then a current flows in a loop.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
what exactly is a ‘surge’ protector?
This is where this question deviates from being a 'generic' question, and becomes more specific.
[image of Common-mode choke]
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is where the MOV conducts again, and dissipated the energy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Edit 2024–10.
2024–10–10[John johnson John Johnson ]
What is lightning?
This device then solves the entire problem.
But… the neutral is now “floating” because of the 1 ohm resistance.
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is 'the assistant's answer'
A fuse is a non-resetable over current circuit protector.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
It also is a device that limits the change in current flow.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
At least they know the answer if they wanted it.
The third is lightning and “how it gets conducted into a home.”
The MOV will conduct when the voltage exceeds 50% of line voltage.
(Dc diagram shown, AC is similar).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Here is a simplified AC power diagram.
nine
[old diagram got deleted by accident]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
First Sentence:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes the function of a fuse.
There are two important concepts here.
A circuit breaker is similar, but is resettable.
Because the load is inductive, the current lags the voltage.(by a bit).
He then asserts :
What does a fuse do?